Quipp 4148 Pacific Scientific 5630 Stepper Motor Drive From Quipp Series 400 Newspaper Stacker Repaired By ERD Ltd with our 3 Year Warranty

This unit is an Quipp or Pacific Scientific (similiar unit with different names) stepper motor drive from a Quipp Series 400 Newspaper Stacker that was fully rebuilt under our 3 Year Warranty Repair program.  This stepper drive was completely rebuilt from top to bottom and the major failures were problems in the power supply and burned outputs.  After repair we hooked up the Quipp to a load stepper motor (we have 100’s of test motors) and tested it fully as shown in the video. This particular repair took 10 days to complete.

At ERD we offer full support for all types and brands of stepper controls including and these were some of the first motor controls we repaired in 1995.

Additionally ERD has repaired 1000’s of items from major newspapers and various types of presses.

From Man Roland to Mitsubishi and Goss – ERD has an extensive track record with over 100 Newspaper’s. (Washington Post – LA Times – Houston Chronicle – Chicago Tribune)

Manufacturer:
Quipp

Part#
4148

ERD TV
Quipp 4148

Repairs Typically Performed:

  • Electrolytic Capacitors
  • Driver ic’s
  • Discrete NPN PNP Transistors

If you have a broken power supply or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Anilam SMA7215-200-1 SMA Series DC Servo From Machining Center Repaired with our 3 Year Warranty

This unit is a sma7215-200-1 Anilam dc servo motor drive used in an almost infinite amount of custom built equipment – this one is from a CNC Machine. ERD repairs many of these motor controls for a broad range of  customers under our 3 Year Warranty Repair program.  This Anilam was completely rebuilt from top to bottom and the major failures were problems in  the output stage. After repair we hooked up the unit and fully tested the unit – the video shows the final  test being performed. This particular repair took 11 days to complete as it was a standard repair when it came in. This particular unit is member of the dc servo motor drive family which ERD has repaired many of over the past 19 years under many configurations and we have all the needed equipment and expertise for this series (we have at least 30 different servo test motors). ERD has repaired many different Anilam units since 1999 so be assured ERD is the best choice for any Anilam repair.

This drive also comes in  other revisions including:

sma7215-100

Manufacturer:
Anilam

Part#
sma7215-200-1

ERD TV
Anilam sma7215-200-1

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replaced outputs

 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Siemens 6se6430-2ud34-5ea0 45KW 60HP Fan/Pump MicroMaster 430 Series AC Drive Repaired with our 3 Year Warranty

This unit is a Siemens MicroMaster MM430 AC motor drive from an HVAC system that was fully rebuilt under our 3 Year Warranty Repair program.  This AC drive was completely rebuilt from top to bottom and the major failures were problems in the power supply and a bad output module.  After repair we hooked up the Siemens to a load AC motor (we have 100’s of test motors) and tested it fully as shown in the video. This particular repair took 6 days to complete.

At ERD we offer full support for all types and brands of AC motor controls from 100’s of manufacturers  and these were some of the first motor controls we repaired in 1995(ERD became a Baldor AC drive Support Center that year).

Siemens is a manufacturer that we stock hundreds of parts  which result in a fairly quick repair process.

Over the last 5 years ERD has repair 100’s of these types of AC motor controls and our success rate is 99% (only if it is turned off with a fire hose is it not repairable)

This particular Siemens is a 480VAC 45KW or about 60HP drive unit but ERD can repair ac drives in all major variations.

Manufacturer:
Siemens

Part#
6se6430-2ud34-5ae0

Series
Siemens 6SE

ERD TV
Siemens 6se6430-2ud34-5ae0

Repairs Typically Performed:

  • Electrolytic Capacitors
  • Driver ic’s
  • Output Module


If you have a broken power supply or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Glamox Loctite 3LPUN-1C4 Low Level Light Power Supply and Backup UPS System Repaired with our 3 Year Warranty

This unit is a 3lpun-1c4 Glamox Loctite power supply and ups backup used in low level safety lighting – this one is from the Entertainment Industry. ERD repairs many of these power supplies for a broad range of  customers under our 3 Year Warranty Repair program.  This Glamox Loctite was completely rebuilt from top to bottom and the major failures were problems in  the output stage controls. After repair we hooked up the unit and fully tested the unit – the video shows the final  test being performed. This particular repair took 6 days to complete as it was a standard repair when it came in. This particular unit is member of both the power supply and ups family which ERD has repaired many of over the past 19 years under many configurations and we have all the needed equipment and expertise for this series (we have at least 10 different battery arrays for ups portion). ERD has repaired many different Glamox Loctite units since 2005 so be assured ERD is the best choice for any Glamox Loctite repair .

This drive also comes in  other names including:

Warner Electric

Danaher

Manufacturer:
Glamox Loctite

Part#
3lpun-1c4

ERD TV
Glamox Loctite 3lpun-1c4

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replaced outputs drivers

 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Seco Danaher Warner Electric WC36269-00 SE2000 Series DC Motor Control Drive Repaired with our 3 Year Warranty

This unit is a wc36269-00 Seco dc motor drive used in an almost infinite amount of custom built equipment – this one is from a Packaging Machine. ERD repairs many of these motor controls for a broad range of  customers under our 3 Year Warranty Repair program.  This Seco was completely rebuilt from top to bottom and the major failures were problems in  the output stage controls. After repair we hooked up the unit and fully tested the unit – the video shows the final  test being performed. This particular repair took 8 days to complete as it was a standard repair when it came in. This particular unit is member of the dc motor drive family which ERD has repaired many of over the past 19 years under many configurations and we have all the needed equipment and expertise for this series (we have at least 30 different dc motors both permanent magnet and shunt type). ERD has repaired many different Seco units since 1995 (like the Bronco II) so be assured ERD is the best choice for any Seco repair .

This drive also comes in  other names including:

Warner Electric

Danaher

Manufacturer:
Seco

Part#
wc36269-00

ERD TV
Seco wc36269-00

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replaced outputs drivers

 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Dynamics Research Corp SST-10-E2-97B SST Series Linear Encoder Repaired with our 3 Year Warranty

This unit is a SST-10-E2-97B Dynamics Research Corp linear encoder used in an almost infinite amount of custom built equipment – this one is from a CNC Machine. ERD repairs many of these linear encoders for a broad range of  customers under our 3 Year Warranty Repair program.  This Dynamics Research Corp was completely rebuilt from top to bottom and the major failures were problems in  the output encoder stage. After repair we hooked up the unit and fully tested the unit – the video shows the final  test being performed. This particular repair took 6 days to complete as it was a standard repair when it came in. This particular unit is member of the linear encoder family which ERD has repaired many of over the past 19 years under many configurations and we have all the needed equipment and expertise for this series. ERD has repaired many different Dynamics Research Corp units since 1999 so be assured ERD is the best choice for any Dynamics Research Corp repair .

Manufacturer:
Dynamic Research Corp

Part#
SST-10-E2-97B

ERD TV
Dynamic Research Corp SST-10-E2-97B

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Cleaned Slide

 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

ASTEC 73-560-0061 MP6 Series Configurable Modular Power Supply Repaired by ERD Ltd with our 3 Year Warranty

This unit is a 73-560-0061 Astec 600watt modular power supply used in an almost infinite amount of custom built equipment – this one is from a Charmilles Roboform Machine. ERD repairs many of these power supplies for a broad range of  customers under our 3 Year Warranty Repair program.  This Astec was completely rebuilt from top to bottom and the major failures were problems in  the output stage and in the pfc circuit. After repair we hooked up the unit and fully tested the unit – the video shows the final  test being performed. This particular repair took 11 days to complete as it was a standard repair when it came in. This particular unit is member of the MP series of power supply products which ERD has repaired many of over the past 5 years under many configurations and we have all the needed equipment and expertise for this series. ERD has repaired many different Astec units since 1995 so be assured ERD is the best choice for any Astec repair .

This power supply also comes in at least 100 other revisions including:

MP6-2L-1D-1E-0M

Astec MP6 Series Configurable Modular Power Supply. 400 – 1200 Watts | 85 – 264 VAC | 120 – 350 VDC Input Voltages | Up to 12 Outputs

 

Manufacturer:
Astec

Part#
73-560-0061

ERD TV
Astec 73-560-0061

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replaced outputs

 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Eaton Cutler Hammer Westinghouse 66d2045g03 IQA6600 IQA6630 Power Analyzer Repaired by ERD Ltd with our 3 Year Warranty

This unit is a 66d2045g43 Eaton IQA6600 series power analyzer  used in monitoring large switchgear distributions – this one is from water treatment facility and it is using this meter to determine power quality for the pumping station. ERD repairs many of these power analyzers for a broad range of  customers under our 3 Year Warranty Repair program.  This Eaton Cutler Hammer was completely rebuilt from top to bottom and the major failures were problems in  the output relays and in the phase measuring circuits. After repair we hooked up the unit and fully tested the unit – the video shows the final  test being performed. This particular repair took 12 days to complete as it was a standard repair when it came in. This particular unit is member of the IQA6600 and IQA6400 series of power analyzers products which ERD has repaired many of over the past 18 years under many names – originally Westinghouse – and we have all the needed equipment and expertise for this series. ERD has repaired many different Eaton units since 1995 so be assured ERD is the best choice for any  Eaton repair .

This analyzer also comes in other revisions including; IQA6430 66D2045G01, IQA6410  66D2045G02, IQA6420 66D2045G05, IQA6610 66D2045G04, IQA6420 66D2045G06

Manufacturer:
EatonPart#
66d2045g43ERD TV
Eaton 66d2045g43

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replaced relays
Cutler Hammer Eaton ds6200 series Iq power analyzer

Cutler Hammer Eaton ds6200 series Iq power analyzer

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Industrial Devices Nextstep-240 Stepper motor drive Repaired by ERD Ltd with our 3 Year Warranty

This unit is a nextstep-240-lres Industrial Devices stepper motor drive used in an almost infinite amount of custom built equipment – this one is from a CNC Machine. ERD repairs many of these power supplies for a broad range of  customers under our 3 Year Warranty Repair program.  This Industrial Device Drive  was completely rebuilt from top to bottom and the major failures were problems in  the output stage. After repair we hooked up the unit and fully tested the unit – the video shows the final  test being performed. This particular repair took 9 days to complete as it was a standard repair when it came in. This particular unit is member of the stepper motor drive family which ERD has repaired many of over the past 19 years under many configurations and we have all the needed equipment and expertise for this series (we have atleast 20 different stepper motors). ERD has repaired many different Industrial Devices units since 2005 so be assured ERD is the best choice for any Industrial Drive repair .

This drive also comes in  other revisions including:

nextstep-240

Manufacturer:
Industrial Devices

Part#
nextstep-240-lres

ERD TV
Industrial Devices Nextstep-240-1res

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replaced outputs

 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Vacon 15CXS5G2 CX and CXS Series 480VAC 15HP AC Drive Repaired with our 3 Year Warranty

This unit is a Vacon 15cxs5g2 15hp 460vac AC drive is used in systems – this one is from a HVAC air flow system and runs a large fan. ERD repairs many of these for a broad range of industries and customers under our 3 Year Warranty Repair program.  This Vacon was completely rebuilt from top to bottom and the major failures were problems in dc bridge and the Eupec drand output module was bad. After repair we hooked up the drive and fully tested the unit – the video shows the motor  test being performed. This particular repair took 13 days to complete as it was a standard repair when it came in. This unit is a member of the Vacon CXS series of drive which ERD has repaired 100’s of over the past 10 years – and we stock a very large amount of spare parts for this series.

Manufacturer:
Vacon

Part#
15cxs5g2

ERD TV
Vacon 15cxs5g2

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Control board reprogrammed

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Reliance Electrocraft DM-20 9101-1302 BRU200 Series AC Servo Drive Repaired by ERD Ltd with our 3 Year Warranty

This unit is a Reliance Electrocraft dm-20d – 9101-1302 AC Servo Drive which  is used in many custom machine systems – this one is from a machining center that builds parts. ERD repairs many of these for a broad range of industries and customers under our 3 Year Warranty Repair program.  This Electrocraft was completely rebuilt from top to bottom and the major failures were problems in the power supply (dead) and the personality module was bad which we corrected with a newly programmed firmware. After repair we hooked up the Drive and fully tested the unit – the video shows the final  test being performed. This particular repair took 14 days to complete as it was a standard repair when it came in. This particular unit is member of the BRU series of Reliance/Electrocraft/Allen Bradley which ERD has repaired many of over the past 20 years – and we have all the needed equipment and firmware for this series. ERD has repair over 100 different types of this same servo drive since 1995 so be assured ERD is the best choice for any drive in this family. This drive is also labeled Gidding and Lewis and a whole host of part number variations under many names.

Manufacturer:
Electrocraft

Part#
dm-20d – 9101-1302

ERD TV
Electrocraft dm-20d-9101-1302

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replace Outputs

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Minarik PA Industries MM21211a DC Motor Control Repaired by ERD Ltd with our 3 Year Warranty

This unit is a Minarik mm21211a  1hp dc drive is used in many systems – this one is from a machining company that produces metal parts. ERD repairs many of these generic dc drives for a broad range of customers under our 3 Year Warranty Repair program.  This Minarik was completely rebuilt from top to bottom and the major failures were problems in the input stage. After repair we hooked up the drive and fully tested the unit – the video shows the final  test being performed. This particular repair took 6 days to complete as it was a standard repair when it came in. This particular unit is very standard generic dc motor control which ERD has repaired many of various manufacturers over the past 19 years – and we have all the needed equipment and expertise for this type of repair. ERD has repaired many dc controls since 1995 so be assured ERD is the best choice for any dc motor control repair.

Manufacturer:
Minarik

Part#
mm21211a

ERD TV
Minarik mm21211a

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replaced input stage
Minarik PA Industries MM21211a DC Motor Control

Minarik PA Industries MM21211a DC Motor Control

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Fanuc a06b-6047-h040 DC Servo Drive for Fanuc CNC DC 0L/5L/6L Repaired by ERD Ltd with our 3 Year Warranty

This unit is a a06b-6047-h040 custom fanuc dc servo drive is used in many Fanuc CNC systems, this one is from a company that produces tooling for textile production. ERD repairs many of these custom Fanuc servo drives for a broad range of  customers under our 3 Year Warranty Repair program.  This Fanuc was completely rebuilt from top to bottom and the major failures were problems in  the output device. After repair we hooked up the drive and fully tested the unit – the video shows the final  test being performed. This particular repair took 9 days to complete as it was a standard repair when it came in. This particular unit is a member of the Fanuc A06 series  of custom CNC products which ERD has repaired many of over the past 18 years – and we have all the needed equipment and expertise for this series. ERD has repaired many different Fanuc units since 1995 so be assured ERD is the best choice for any  Fanuc CNC repair.

Manufacturer:
Fanuc

Part#
a06b-6047-h040

ERD LTD
Fanuc a06b-6047-4040

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Replaced output
Fanuc DC Servo Drive a06b-6047-h040 Repair

Fanuc DC Servo Drive a06b-6047-h040 Repair

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Allen Bradley (AB) 2711-k10g8 2711 Series Panelview Family Operator Interface for PLC Repaired by ERD Ltd with our 3 Year Warranty

This unit is a Allen Bradley (AB) 2711-k10g8-a Panelview OIT which  is used in many custom control systems – this one is from an automated robot that builds parts for the auto industry (Nissan Instrument Clusters to be exact). ERD repairs many of these for a broad range of industries and customers under our 3 Year Warranty Repair program.  This Allen Bradley was completely rebuilt from top to bottom and the major failures were problems in the power supply (dead) and the display was bad which we corrected with new screen. After repair we hooked up the OIT and fully tested the unit – the video shows the final  test being performed. This particular repair took 11 days to complete as it was a standard repair when it came in. This particular unit is member of thePanelview series of Allen Bradley PLC products which ERD has repaired many of over the past 20 years – and we have all the needed equipment and software (PanelBuilder) for this series. ERD has repair over 1000 different types of Allen Bradley equipment since 1995 so be assured ERD is the best choice for any Allen Bradley repair.

Manufacturer:
Allen Bradley

Part#
2711-k10g8-a

ERD TV
Allen Bradley 2711-k10g8-a

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies rebuilt
  • Gray Scale screen replaced

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Repair of the Day: Lumina Power Supply CCPF-3800 for Cynosure Apogee Elite PN 11001112 Repaired with our 3 Year Warranty

This unit is a 11001112 CCPF series Lumina HV Power Supply which was fully rebuilt and tested under our 3 Year Warranty Repair program.  This power supply was completely rebuilt from top to bottom and the major failures were problems in the power supply input stage and in the output stage.  After repair we hooked up the supply to our capacitor bank and tested it fully as shown in the pictures – 900volts out with it set to output 900volts (yes we calibrate). This particular repair took 5 days to complete as it was a normal repair. At ERD we offer full support for all types of power supply products.

Manufacturer:
Lumina

Part#
11001112

Repairs Typically Performed:

  • Electrolytic Capacitors
  • Input Board
  • Discrete NPN PNP Transistors
Lumina HV Power Supply CCPF-3800 for Cynosure Apogee Elite PN 11001112 REPAIR

Lumina HV Power Supply CCPF-3800 for Cynosure Apogee Elite PN 11001112 REPAIR

 

If you have a broken monitor /power supply / drive or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

X