Okuma VAC III Spindle Drive D-11 Type A Repaired By ERD Ltd with our 3 YEAR Warranty for LB-10 LB-12 LB-15 LB-20 Turning Centers


This unit is a D-11 Customized AC Spindle Drive used in many Okuma machining systems including all the Okuma LB Series Turning Centers. ERD repairs many of these for the Machining Industry under our 3 Year Warranty Repair program.  This Okuma was completely rebuilt from top to bottom and the major failures were problems in all the power supply stages and in the output to the motor- we replaced all 6 IGBT’s. After repair we hooked up the drive and fully tested the unit. This particular repair took 10 days to complete as it was a normal repair time repair. This particular unit is used in the manufacturing of machined parts and is used in a Okuma LB-12 Machining Center CNC. These Okuma Spindle Drives can also be used for any type of heavy machining work and we have seen variants in many Okuma machines in many area of industry.
 

 

Manufacturer:
Okuma

Part#
D-11 Type A Spindle

Repairs Performed:

  • Electrolytic Capacitors
  • Power supplies
  • Output IGBT’s

ERD TV Link
 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Mitsubishi FR-Z320-11k-AL Spindle Drive from a Mazak Machining Center with FR-ZPO

This unit is a FR-Z320-11K-AL Customized AC Spindle Drive used in many machining systems including Mazak. ERD repairs many of these for the Machining Industry under our 3 Year Warranty Repair program.  This Mitsubishi was completely rebuilt from top to bottom and the major failures were problems in all the power supply stages and in the output to the motor. After repair we hooked up the drive to our AC Motor and fully tested the unit. This particular repair took 10 days to complete as it was a normal repair time repair. This particular unit is used in the manufacturing of tool and die machines parts and is used in a Mazak multiaxis CNC. These Mitsubishi Spindle Drives can also be used for any type of heavy machining work and we have seen variants in Plastic Manufacturing. This board needed a replacement FR-ZPO board which is an optional encoder feedback input board.

Manufacturer:
Mitsubishi

Part#
FR-Z320-11K-AL

Repairs Performed:

  • Electrolytic Capacitors
  • Custom Interface Board
  • Ouputs

ERD TV Link

Mitsubishi Frequol FR-z320-11k-AL AC Spindle Drive for Mazak CNC

Mitsubishi Frequol FR-z320-11k-AL AC Spindle Drive for Mazak CNC

Mitsubishi Frequol FR-z320-11k-AL AC Spindle Drive for Mazak CNC Inside

Mitsubishi Frequol FR-z320-11k-AL AC Spindle Drive for Mazak CNC Inside

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

Allen Bradley 86002013H 9 INCH CRT OPERATOR PANEL 8600 CNC

86002013H CRT Operator Interface Terminal OIT used in many 8000 series CNC rack systems. ERD repairs many of these for the Machining Industry under our 3 Year Warranty Repair program.  This Allen Bradley was completely rebuilt from top to bottom and the major failures were problems in all the power supply stages and in the 9 inch monitor. After repair we hooked up the OIT to our loaded 8000 series rack and fully tested the unit. This particular repair took 10 days to complete as it was a normal repair time repair. This particular unit is used in the manufacturing of metal boxes used throughout heavy industry. These 8000 series CNC systems can also be used for any type of large metal work – including jet engine manufacturing. (Pratt and Whitney uses many 8200 series CNC systems and also has several 8600 series)

Manufacturer:
Allen Bradley

Part#
86002013 H

Repairs Performed:

  • Electrolytic Capacitors
  • Diodes
  • CRT

ERD TV Link

Allen Bradley 8200 CNC Full Rack System

Allen Bradley 8200 CNC Full Rack System

Allen Bradley 8200 CNC OIT

Allen Bradley 8200 CNC OIT

Allen Bradley 8200 CNC Full Set Manuals

Allen Bradley 8200 CNC Full Set Manuals

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Allen Bradley 1388B-AV20 DC PWM Servo Controller 20A /40A peak

This unit is a 1388B-AV20 DC Servo Axis Drive used in many systems. ERD repairs many of these for the Machining Industry under our 3 Year Warranty Repair program.  This Allen Bradley was completely rebuilt from top to bottom and the major failures were problems in all the power supply stages and in the output to the motor. After repair we hooked up the drive to our DC Servo Motor and fully tested the unit. This particular repair took 10 days to complete as it was a normal repair time repair. This particular unit is used in the manufacturing of screws and is used in a 8200 series lathe. These 1388 series Servo’s can also be used for any type of heavy work.

Manufacturer:
Allen Bradley

Part#
1388B-AV20

Repairs Performed:

  • Electrolytic Capacitors
  • Diodes
  • Ouputs

ERD TV Link
 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Allen Bradley 8000 PG2 Power Supply for the 8000 Series Allen Bradley CNC

This unit is a 8000 PG2 Power Supply used in many 8000 series CNC rack systems. ERD repairs many of these for the Machining Industry under our 3 Year Warranty Repair program.  This Allen Bradley was completely rebuilt from top to bottom and the major failures were problems in all the power supply stages and in the e-stop controls. After repair we hooked up the power supply to our loaded 8200 series rack and fully tested the unit. This particular repair took 10 days to complete as it was a normal repair time repair. This particular unit is used in the manufacturing of large ball screws used throughout heavy industry. These 8000 series rack power supplies can also be used for any type of large metal work – including jet engine manufacturing. (Pratt and Whitney uses many 8200 series CNC systems)

Manufacturer:
Allen Bradley

Part#
8000 PG2

Repairs Performed:

  • Electrolytic Capacitors
  • Diodes
  • Relays

ERD TV LINK

Allen Bradley 8000-pg2 for 8200 CNC Full Rack Power Supply

Allen Bradley 8000-pg2 for 8200 CNC Full Rack Power Supply

Allen Bradley 8200 CNC Full Rack System

Allen Bradley 8200 CNC Full Rack System

Allen Bradley 8200 CNC OIT

Allen Bradley 8200 CNC OIT

Allen Bradley 8200 CNC Full Set Manuals

Allen Bradley 8200 CNC Full Set Manuals

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Isel Automation 568120 Multi-Axis CPM2018

This unit is a 568120 Multi-Axis Motor Control System used in many applications. ERD repairs many of these for the Eyeglass Processing Industry under our 3 Year Warranty Repair program.  This Isel was completely rebuilt from top to bottom and the major failures were problems in the power supply stage and open stepper control channels. After repair we hooked up the drive to our Multi-Axis CNC and fully tested the unit. This particular repair took 10 days to complete as it was a normal repair time repair. This particular model is used in the insertion of holes into eyeglass lenses which requires a large amount of accuracy. These multi-axis controls can also be used for any type of axis movement and control – such as engraving.

Link to Engraving

Manufacturer:
Isel Automation

Part#
568120

Repairs Performed:

  • Electrolytic Capacitors
  • Diodes
  • Stepper Drivers

ERD TV Link

Isel Automation 56810 Multi Axis CPM2018

Isel Automation 56810

 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Baldor Fadal 215 FVF1915C-21 15HP 230VAC Spindle Drive Repair

Baldor Fadal 215 Spindle Drive Repair

Baldor Fadal 215 Spindle Drive Repair

This unit is a Fadal 215 AC Spindle Drive with 15hp of output power and was repaired under our 3 Year Warranty Repair program.  This drive was completely rebuilt from top to bottom and the major failures were problems in the power supply stage and a open power igbt. After repair we hooked up the drive to our Baldor  motor and tested it fully. This particular repair took 10 days to complete as it was a normal repair time repair. This particular drive is a spindle on a Fadal machine tool. It is in reality a customized Baldor Vector drive with specific machine tool software programming. ERD has repaired all Baldor products since 1995 when we started out as a Baldor Service Center.

Manufacturer:
Baldor

Part#
Fadal_215

Repairs Performed:

  • Electrolytic Capacitors
  • Diodes
  • IGBT

 

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

1982 Gettys DC Drive Project – Day 3 – 66-1330-16 RS330 GMC Mark VI

getty dc drive 66-130-16 RS330 GMC Mark VI scr array rebuilt

getty dc drive 66-1330-16 RS330 GMC Mark VI scr array rebuilt

Above is Day three of a full rebuild of a Getty DC Drive originally built in 1982.

This motor control is now fully apart after being power cleaned and ERD has checked out every sub-assembly

Day 3 we checked out all the different assemblies and we are waiting for the ordered parts.

We are replacing over 100 parts – from the fans – to all the caps – the aged op amps – and the main scr’s and we stock 90% of needed parts

IRT 1318-Rack Axis Servo Drive Repair by ERD

Repaired and setup to test IRT 1318 Rack

Repaired and setup to test IRT 1318 Rack

This unit is a Irt 1318-Rack AC Servo Drive with 18Amp of output power and was repaired under our 3 Year Warranty Repair program.  This drive was completely rebuilt from top to bottom and the major failures were problems in the power supply stage. After repair we hooked up the drive to our Baldor 6 pole Servo motor and tested it fully as shown in the video. This particular repair took 3 days to complete as it was a RUSH. The 1318 series of drive is found primarily in the robot industry (Irt is owned by REIS) with this particular drive being an axis servo on a Mazak machine tool.

Manufacturer:
Irt

Part#
1318-rack

Repairs Performed:

  • Electrolytic Capacitors
  • Diodes
  • Discrete NPN PNP Transistors

Other Related Irt Servo Drives

1335-rack

1306-rack

 

If you have a broken control board or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

1982 Gettys DC Drive Project – Day 2 – 66-1330-16 RS330 GMC Mark VI

Below is Day two of a full rebuild of a Getty DC Drive originally built in 1982.

This motor control is now fully apart after being power cleaned.

Day 2 examine all sub-assemblies and get a needed part list for new parts.

We are replacing over 100 parts – from the fans – to all the caps – the aged op amps – and the main scr’s

getty dc drive 66-130-16 RS330 GMC Mark VI chassis

gettys dc drive 66-1330-16 RS330 GMC Mark VI chassis

getty dc drive 66-130-16 RS330 GMC Mark VI wire wrap assembly

gettys dc drive 66-1330-16 RS330 GMC Mark VI wire wrap assembly

getty dc drive 66-130-16 RS330 GMC Mark VI scr's

gettys dc drive 66-1330-16 RS330 GMC Mark VI scr’s

getty dc drive 66-130-16 RS330 GMC Mark VI field module

gettys dc drive 66-130-16 RS330 GMC Mark VI field module

getty dc drive 66-130-16 RS330 GMC Mark VI scr array

gettys dc drive 66-1330-16 RS330 GMC Mark VI scr array

1982 Gettys DC Drive Project – Day 1 – 66-1330-16 RS330 GMC Mark VI

Below is Day one of a full rebuild of a Gettys DC Drive originally built in 1982.

This motor control has NEVER been removed from the equipment and as such is being completely rebuilt as close as new as possible.

As progress is made this will have additional posts.

Day 1 is document and take apart (we will also power wash the drive due to a large amount of grease (30 years worth) plus order any parts we do not have in our large inventory.

getty dc drive 66-1330-16 RS330 GMC Mark VI side view

getty dc drive 66-1330-16 RS330 GMC Mark VI all laid out

getty dc drive 66-1330-16 RS330 GMC Mark VI front

getty dc drive 66-130-16 RS330 GMC Mark VI scr

getty dc drive 66-1330-16 RS330 GMC Mark VI top

getty dc drive 66-1330-16 RS330 GMC Mark VI flip card

Weir SMM 150 12 Power Supply SMM150/12 used in Hurco and other Machine Tool

Weir SMM 150 12

This unit is a SMM 150 12 Multiple Output 150 Watt Power Supply with 150 watts of output power at 5vdc 12Amp with 2 12vdc outputs at 4amps each which was fully rebuilt and tested under our 3 Year Warranty Repair program.  This power supply was completely rebuilt from top to bottom and the major failures were problems in the power output stage and burned outputs.  After repair we hooked up the power supply to our dynamic power supply tester and tested it fully as shown in the video. This particular repair took our standard 10 days to complete. At ERD we offer full support for all types of power supplies.

Manufacturer:
Weir

Part#
SMM 150 12

Repairs Typically Performed:

  • Electrolytic Capacitors
  • Fet’s
  • Discrete NPN PNP Transistors

Other Related Weir Power Supplies click on the Weir link above.

If you have a broken power supply or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Astec Multiple Output MP6 Series Power Supply Repair 73-560-0061 From Charmilles Roboform EDM Machine

Astec 73-560-0061

Astec 73-560-0061

This unit is a Astec 73-540-0539 Multiple Output 600 Watt Power Supply with 600 watts of output power at 5vdc 120Amp with 2 12vdc outputs at 17amps each which was fully rebuilt and tested under our 3 Year Warranty Repair program.  This power suppply/ballast was completely rebuilt from top to bottom and the major failures were problems in the power output stage and burned outputs.  After repair we hooked up the power supply to our dynamic power supply tester and tested it fully as shown in the video. This particular repair took our standard 10 days to complete. At ERD we offer full support for all types of power supplies.

This particular power supply was out of a Charmilles Roboform EDM machine which for those who do not know – EDM is an electrical discharge machine – a CNC metal machining system that uses electrical discharge to modify metal.

The purpose of this power supply is for all the main control which need the 5VDC at a lot of amperage.

 

Manufacturer:
Astec

Part#
73-540-0539

Repairs Typically Performed:

  • Electrolytic Capacitors
  • Fet’s
  • Discrete NPN PNP Transistors

Other Related Astec Power Supplies click on the Astec link above.

If you have a broken power supply or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

Lumina HV Power Supply CCPF-3800 for Cynosure Apogee Elite PN 11001112


This unit is a Lumina High Voltage Laser Ballast Power Supply with 1kw of output power at a wopping 1000v and was fully rebuilt under our 3 Year Warranty Repair program.  This power supply/ballast was completely rebuilt from top to bottom and the major failures were problems in the power output stage and burned output fet’s.  After repair we hooked up the Ballast to our Capacitive Charge Bank and tested it fully as shown in the video. This particular repair took our standard 10 days to complete. At ERD we offer full support for all the associated parts found on in UV water treatment systems.(This power supply fires the 755 nm Alexandrite laser which is then used for hair removal and dermabrasion)

ERD supports all major laser power supply components for all the Cynosure Apogee and Candela Gentle Pro

Manufacturer:
Lumina

Part#
11001112

Repairs Typically Performed:

  • Electrolytic Capacitors
  • Fet’s
  • Discrete NPN PNP Transistors

Other Related Lumina Power Supplies

11001066

11001047

11001067

15001027

cynosure cap bank
If you have a broken power supply or any other electronic component contact us by phone 1-336-992-3611 or email us at erd@erdltdinc.com, we will evaluate and quote your unit the same day, and there is never a fee for this service.

 

X